Winter storage can be particularly hard on your pressure washer. Freezing temperatures can force any residual water to expand and damage the pump. Even without the extreme cold, residual water can evaporate and leave behind mineral deposits or cause corrosion. Dry winter air also attacks the seals and pistons in your pressure washer, causing them to wear out prematurely. These elements can result in very costly damages to your pressure washer.

Fortunately, there is an inexpensive solution to this problem: Kärcher’s Pump Guard for Pressure Washers. This specially formulated solution will protect your pressure washer from freezing (down to -25º F), corrosion and premature wear. It also adds lubrication to your pressure washer’s valves and seals to prevent sticking in the future. Ordinary anti-freeze is insufficient in this respect and is not recommended. Kärcher’s environmentally friendly Pump Guard for Pressure Washers is specifically formulated to counteract the damaging effects of winter storage. Put your guard up today!

Kärcher’s Pump Guard for Pressure Washers is easy to use. Simply follow these five steps for protect your pressure washer:

• Turn off your pressure washer
• Disconnect all hoses
• Screw the valve tip of the Pump Guard bottle into the water inlet on your pressure washer
• Open the valve on the Pump Guard bottle
• (Gas Pressure Washer) With the ignition off, pull the starter rope. Draw the entire contents of the Pump Guard bottle into the pump. (Electric Pressure Washer) Turn the pressure washer on. Draw the entire contents of the Pump Guard bottle into the pump.

Why wait? Kärcher’s 16 oz. Pump Guard for Pressure Washers is in stock and ready to ship today. With a price of just $7.99, order a couple of bottles to use in the spring and summer as well. Our Pump Guard can be ordered by calling 1-800-537-4129, online at www.buykarcher.com and other Kärcher authorized retailers. Protect your investment today!